General Wire I-95 Sectional Machine Without Cable

Mfg Part #:	I-95
Premier Part #:	B213872
Manufacturer:	GENERAL WIRE SPRING COMP
GENERAL PIPE CLEANERS SECTIONAL MACHINE (NO CABLE) HERE'S A SECTIONAL CABLE MACHINE THAT DRIVES 7/8" AND 5/8" SECTIONS - OR EVEN 5/16" CABLES FOR SMALL DRAIN WORK. YOU SWITCH FROM 7/8" TO 5/8" AND BACK BY REPOSITIONING THE CHUCK CONE. NO ADAPTER REQUIRED. ATTACH A SMALL DRUM TO THE BACK OF THE MACHINE TO DRIVE SMALLER CABLES. THE I-95 GIVES YOU POWER AND CONVENIENCE. THE MOTOR IS A 1/3 HP CAPACITOR TYPE SO IT DELIVERS PLENTY OF TORQUE TO THE CABLES. YET AS SOON AS YOU LIFT THE DRIVE HANDLE THE CABLE STOPS ROTATING SO THERE'S NO ADDITIONAL TORQUE BUILD UP. YOU ALSO USE THE DRIVE HANDLE TO CARRY THE MACHINE. AND WHEN IT'S IN POSITION ON THE JOB ITS FOUR POINT BASE GIVES IT ROCK-SOLID STABILITY. A CUTTER HOLDER IS ATTACHED TO THE BACK OF THE I-95 SO YOUR CUTTING HEADS ARE ALWAYS WITH THE MACHINE. A GROUND FAULT CIRCUIT INTERRUPTER IS STANDARD EQUIPMENT. CLEAR 1-1/2" - 2" LINES WITH 5/16" X 25' CABLE. CLEAR 2" - 3" LINES UP TO 125 FEET LONG WITH 5/8" X 7-1/2' SECTIONS OR 4" LINES UP TO 150 FEET LONG WITH 7/8" X 15' SECTIONS.
Retail:	$ 3,092.93
	$ 2659.92
Total Savings:	$ 433.01(14%)

IN STOCK	Quantity: